Supreme Reference Precision for Digital Audio | Available at Trimira Audio
The Nordost Odin 2 Digital Interconnect represents Nordost's flagship approach to high-performance digital signal transmission, designed for reference systems where controlled impedance, shielding, and conductor geometry are critical considerations.
As part of the Supreme Reference Series, the Odin 2 Digital Interconnect combines Dual Mono-Filament construction, Total Signal Control (TSC) shielding, ultra-pure silver-plated solid-core conductors, and proprietary HOLO:PLUG® terminations.
It is available in two dedicated digital architectures: 75-ohm coaxial for S/PDIF and 110-ohm balanced AES/EBU, allowing the cable to be matched correctly to the digital interface being used.
At Trimira Audio, we recommend the Odin 2 Digital Interconnect for state-of-the-art digital systems where precise impedance architecture and premium construction are priorities.
Key Features & Technological Innovations
Dual Mono-Filament Technology
Each solid-core conductor incorporates two helical FEP strands beneath the outer FEP jacket.
This creates a low-contact dielectric environment designed to minimize dielectric interaction and energy storage.
Ultra-Pure Silver-Plated Solid-Core OFC
The conductors use 99.999999% high-purity OFC copper with substantial 85 µm silver plating.
The solid-core architecture provides consistent conductor geometry without the strand interaction associated with conventional multi-strand digital cables.
Total Signal Control (TSC) Shielding
Individual signal paths are surrounded by 100% coverage shielding, providing extensive protection against external:
- RF interference
- Electromagnetic interference
- High-frequency electrical noise
Dedicated Impedance Architectures
The Odin 2 is available in two distinct versions:
75-ohm coaxial
Designed for S/PDIF and other 75-ohm digital interfaces.
110-ohm AES/EBU
Designed for balanced professional digital interfaces using 110-ohm characteristic impedance.
Using the correctly specified cable for the interface is important; a 75-ohm coaxial cable and 110-ohm AES/EBU cable are not interchangeable simply because both carry digital audio.
Low-Mass HOLO:PLUG® Terminations
The 75-ohm version uses HOLO:PLUG® BNC connectors, supplied with 75-ohm BNC-to-RCA adapters.
The AES/EBU version uses HOLO:PLUG® 3-pin XLR connectors designed for the 110-ohm balanced interface.
Technical Specifications
| Specification |
Odin 2 75-Ohm Digital Coaxial |
Odin 2 110-Ohm AES/EBU Balanced |
| Series |
Supreme Reference Series |
Supreme Reference Series |
| Insulation |
High-Grade Extruded FEP |
High-Grade Extruded FEP |
| Construction |
Dual Mono-Filament, Coaxial |
Dual Mono-Filament, Twin-Axial |
| Conductors |
1 × 11 AWG Solid-Core |
2 × 18 AWG Solid-Core |
| Conductor Material |
99.999999% Solid-Core OFC (85 µm Silver Plating) |
99.999999% Solid-Core OFC (85 µm Silver Plating) |
| Capacitance |
15.3 pF/ft |
10.5 pF/ft |
| Impedance |
True 75 Ω |
True 110 Ω |
| Shielding |
100% Total Coverage (TSC) |
100% Total Coverage (TSC) |
| Velocity of Propagation |
90% Speed of Light |
90% Speed of Light |
| Terminations |
HOLO:PLUG® 75-Ohm BNC, Including BNC-to-RCA Adapters |
HOLO:PLUG® 110-Ohm 3-Pin XLR |
| Standard Lengths |
1.25 m, 2.0 m, 3.0 m + Custom Lengths |
1.25 m, 2.0 m, 3.0 m + Custom Lengths |
75 Ω Coaxial vs 110 Ω AES/EBU
| Connection |
Odin 2 Version |
Typical Interface |
| 75 Ω Coaxial |
BNC / BNC-to-RCA |
S/PDIF |
| 110 Ω Balanced |
XLR |
AES/EBU |
For the best electrical match, select the Odin 2 version corresponding to the actual digital interface on your source and DAC.
Consult with the Digital Audio Specialists at Trimira Audio
The Nordost Odin 2 Digital Interconnect is intended for reference digital systems where correct impedance, shielding, connector architecture, and conductor geometry are given particular attention.
Trimira Audio can assist with:
- 75 Ω S/PDIF versus 110 Ω AES/EBU selection
- BNC versus RCA connectivity
- XLR AES/EBU system matching
- Cable length selection
- Transport-to-DAC configuration
- Reference digital-system auditions
For a flagship digital connection, Odin 2 combines Dual Mono-Filament construction, 85 µm silver-plated solid-core OFC, 100% TSC shielding, dedicated 75/110-ohm architectures, and HOLO:PLUG® termination.
