Nordost Leif 3 Series White Lightning 3 Analog Interconnects

Pure Analogue Signal Flow in the Leif 3 Series | Available at Trimira Audio

The Nordost White Lightning 3 Analog Interconnect provides an entry point into Nordost's Leif 3 Series, designed for clean, controlled analogue signal transfer between source components, preamplifiers, integrated amplifiers, and other compatible audio electronics.

The cable combines silver-plated solid-core OFC conductors, mechanically controlled conductor geometry, FEP insulation, and high-coverage shielding in a low-mass construction designed to minimize unwanted electrical and mechanical interaction.

At Trimira Audio, we recommend the White Lightning 3 Analog Interconnect as a strong starting point for listeners upgrading from conventional bundled or generic analogue interconnects.

Key Features & Technological Innovations

Silver-Plated Solid-Core OFC Conductors

White Lightning 3 uses 4 × 26 AWG solid-core conductors manufactured from 99.9999% high-purity OFC copper with pure silver plating.

The solid-core architecture provides consistent conductor geometry without the strand interaction associated with conventional stranded cables.

Mechanically Tuned Lay & Spacing

The conductors are arranged using controlled spacing designed to manage:

• Electrical interaction
• Electromagnetic coupling
• Mechanical resonance
• Microphonic behavior

High-Grade Extruded FEP Insulation

Fluorinated Ethylene Propylene (FEP) provides a low-loss dielectric environment with high thermal and mechanical stability.

The specified propagation velocity is 80% of the speed of light.

95% Coverage Braided Shielding

A high-coverage braided shield provides approximately 95% coverage, helping protect the analogue signal from:

• RF interference
• Electromagnetic interference
• External electrical noise
• Environmental crosstalk

Precision Hand Terminations

White Lightning 3 is available with:

• Gold-plated low-mass RCA connectors
• Neutrik 3-pin XLR connectors

The XLR version is suitable for compatible balanced analogue systems.

Technical Specifications

RCA vs XLR Configuration

RCA

The single-ended RCA configuration is appropriate for conventional analogue connections between compatible source and amplification components.

XLR

The balanced XLR configuration is designed for equipment supporting a genuine balanced analogue signal path.

Trimira Audio can help determine the appropriate termination based on your equipment's input and output architecture.

Consult with the Audio Specialists at Trimira Audio

The Nordost White Lightning 3 Analog Interconnect provides an accessible introduction to Nordost's Leif 3 analogue cable range.

Trimira Audio can assist with:

• RCA versus XLR selection
• Cable length selection
• Source-to-preamplifier matching
• Preamplifier-to-amplifier connections
• Complete Nordost cable-system planning
• Private system auditions

White Lightning 3 combines 26 AWG silver-plated solid-core OFC, mechanically controlled geometry, FEP insulation, 95% shielding, and precision RCA or XLR termination in an entry-level Leif 3 Series analogue interconnect.