-
Media gallery
-
Media gallery
-
Media gallery
-
Media gallery
-
Media gallery
-
Media gallery
-
Media gallery
-
Media gallery
-
Media gallery
300W Stereo Power Amplifier RPA-MG3000
- Regular price
- $64,999
- Regular price
-
- Sale price
- $64,999
- Unit price
- per
Made in Japan
Couldn't load pickup availability
Have a question?
Notified by email when this product becomes available
$64,999
- Description
- Specification
- Installation
- Returns
Our most important philosophy is "The realistic sound is the most beautiful." The infinitely realistic sound reproduction of RPA-MG3000 conveys the musicality of the performer as it is. It is important that the timbre is correct because the performers convey their musicality through the timbre of the instrument.
The amplifier is a musical instrument
The wooden panels integrated with the amplifier provides beautiful tones in the music. Spruce and maple, the same combination of wood panels as stringed instruments, vibrates with the amplifier and create energy to convey musicality.
Like a musical instrument maker, we carefully selected materials and considered different combinations.
Only Hickory supports the full weight of the main chassis
Wooden feet of maple wood with hickory embedded in the center are designed in such a way that only the hickory located in the center is grounded.
The RPA-MG3000 is built as an instrument.
The timbre of a musical instrument is composed of minute signals
The sounds of instruments and human voice contain an enormous amount of detailed harmonic signals, which form a beautiful sound. Therefore, minute signals play an important role in the reproduction of realistic sounds. The PURE DIRECT SYSTEM and specially blended capacitors of RPA-MG3000 amplifies all these minute signals faithfully without exception. SPEC takes special concern in the faithful representation of minute audio signals.
Pure Direct Connection
In order to reproduce the realistic sound, it is important to reproduce MINUTE SIGNALS without omission. In the case of low-level transmission using a preamplifier, more smaller signals in the music signal may be buried in noise. Signals smaller than the noise level limit will shrinks further and could disappear completely.
On the other hand, THE PURE DIRECT CONNECTION transmits the music signal to the input of the power amplifier at a large level, and controls the volume with the electronic volume placed just before the classD block, so that the minute signal is guided to the final stage as much as possible.
By amplifying the signal that keeps the minute signal in class D, the speaker reproduces the delicate musical expression played by the musical instrument.
The protagonist of realistic sound is a minute signal.
SPEC aiming for realistic and musical reproduction value the minute signals.
Capacitor Blending
Like a sommelier, we taste a variety of capacitors and blend them.
Realistic sound is made by combination of capacitors and woods.
MONOLITH AND CANDY
MONOLITH AND RED CACTUS
SIDE WOOD AND CAPACITORS
create a truly realistic sound
The final stage of class D
The final stage of class D is placed small to enable delicate expression. These two small FETs per channel are the 300W output itself.
800VA R-CORE TRANSFORMER
Powerful energy drives the speakers reliably, reproducing the sound pressure of the instrument. Sound pressure is the energy of the instrument itself.
MUSICALITY SELECTOR
1 Neutral: very close to the actual sound of the instruments
2 Sophisticated: Artistic quality beyond the actual sound
It is a quite different method from that of a conventional tone control. Frequency characteristic does not change at all. Each mode is depending on the adopted parts itself.
But isn't that a job for a pre-amplifier? No! The class D circuit has a very sensitive point. At the post-stage of CLASS D, musicality change can be achieved very effectively. We do not change frequency characteristic. We merely change resonance characteristic of special parts at the post-stage of CLASS D.
RPA-MG3000 appearance
(Left) AMP UNIT / (Right) POWER UNIT
AMP UNIT
POWER UNIT
| Maximum output | 300 W × 2 (4Ω) |
|---|---|
| Frequency response | 10 Hz - 30 kHz ±1dB |
| Speaker Impedance | 4-16 ohm |
| Line input terminals | XLR input: 1 RCA inputs:1 |
| Speaker terminal | L,R |
| External dimensions (POWER UNIT) |
450 mm (width) × 180 mm (height) × 440 mm (depth) |
| External dimensions (AMP.UNIT) |
450 mm (width) × 180 mm (height) × 455 mm (depth) |
| Weight (POWER UNIT) | 27 kg |
| Weight (AMP.UNIT) | 18 kg |
Sometimes we want to listen to our brand new audio setup without having to worry about dragging B&W up two flights of stairs - that's where we come in! Not only are our team experts in high quality AV equipment, they're also professional bodybuilders* who can deliver and install your new toys quickly and efficiently.
Our in-house team can service those in Brisbane, the Gold Coast, and the Sunshine Coast. Give us a call to get an obligation-free quote today!
*the term 'professional bodybuilders' is used here loosely...
Our refund policy operates in a 30-day window - after this time we are unable to accept the product and cannot issue a refund. Don't worry, our products are hand picked from thousands of luxury brands to ensure you are only offered the best of the best so we doubt you'll need to consider this policy at all. If you are concerned about making the wrong decision when it comes to your purchase, please feel free to talk with our team of experts who can advise you on equipment based on your personal music taste, aesthetics, and the layout of your listening room. Still not convinced? Discuss the possibility of a loan (trial period) with our experts and hear the difference yourself.
Recommended products
